Large Pump High Flow Electric Water Transfer Submersible Blade Pump

• Max.Head: 10-30m
• Max.Capacity: 90000m3/h
• Driving Type: Motor
• Material: Cast Iron
• Structure: Single-stage Pump
• Assembly: Liquid Pumps
• Power: Electric
• Start Up: Electric Pump
• Type: Blade Pump
• Application: Submersible Pump, Clarified Water Pump, Sewage Pump, Slurry Pump
• Industry: Mechanical Pump
• Media: Sewage Pumps
• Performance: Wear Pump
• Theory: Axial Flow Pump
• Transport Package: Export Wooden Case
• Specification: cast iron, stainless steel
• Trademark: Sinoflo
• Origin: China
• Production Capacity: 1000 PCS Per Year

Product Description

Summarize of Large Pump High Flow Electric Water Transfer Submersible Blade Pump
Installation of water flow Channel: in terms of recommended sample installation diagram
The form of water exit: flap valve or other ways
Installation ways: Floor fixed type, suspended type, floated type and diagnal installed type;
Max. Capacity: 90000m3/h
Max. Head: 20m
Motor of Large Pump High Flow Electric Water Transfer Submersible Blade Pump

1. Submersible motor
2. Power Level: electrical performance conforms to GB756
3. Protection level: IP68
4. Voltage grade: ≤1300kw, voltage, 380v, 660v, 6000v, 10000V
5. Insulation level: F
6. Rated frequency: 50Hz/60Hz

 

Shaft seal of Large Pump High Flow Electric Water Transfer Submersible Blade Pump
There are two or three stages of mechanical seal. The first stage called carborundum (directly contact with water). The second and third stage called graphite and carborundum.
Leak proof Equipment of Large Pump High Flow Electric Water Transfer Submersible Blade Pump
Sinoflo Axial/Mixed Flow Pump have been equipped with leak proof sensors. When the oil tank, the inner part of motor or the junction box has been leaked by water, the sensor will signal or made the motor shut down, and retain the malfunction signal.
Over heating protection system of Large Pump High Flow Electric Water Transfer Submersible Blade Pump
A overheating protection device is fastened on the motor winding. When the temperature exceeds the stated value, the device will signal or made the motor shut down.
Rotation direction:
Seen from the top of the motor, the impeller is rotating clock wisely.





Application of Large Pump High Flow Electric Water Transfer Submersible Blade Pump
Sinoflo axial/mixed flow pump is widely used in industry and agriculture water lifting, urban water supply, light polluted water discharge and other water transfer project.
Working condition of Large Pump High Flow Electric Water Transfer Submersible Blade Pump
Clean water with the temperature no more than 50 or some liquids that are similar to water.