Application of 10" Deep Well Submersible Turbine Pump This kind of submersible pump is suitable for farm irrigation, sprinkling, fountain, Rainwater Recycling System, mining drainage, rig cooling system, emergency rescue and disaster relief, urban water supply, enterprises and government institutions water lifting projects. This product is low noise, high efficiency and energy saving
Technical parameter of 10" Deep Well Submersible Turbine Pump
Max. outer diameter: 234mm; outlet diameter: DN125
Outlet connection parameter: 8 threaded studs M14×60, bolts center distance:180mm.
In order to install easily, we particularly have equipped with a matching flange (outer diameter: 178mm, inter diameter: DN125 and thickness: 16mm) consistent to the outlet.
Medium range of 10" Deep Well Submersible Turbine Pump
1. Clean water, chilled water / cooling water, rainwater, gushing water of mining, drinking water, etc.
2. Water temperature: +5ºC--+100ºC
3. Solid content (mass ratio): ≤0.01%
4. The full set must be submerged into water completely in vertical position.
Motor Parameter of 10" Deep Well Submersible Turbine Pump
The submersible motor is lubricated by clean water. It must be filled with clean water, or else its service life will be lessen. If you forget filling, the motor will be broken.
Motor protection level: IPX8
Power source of 10" Deep Well Submersible Turbine Pump
Rated voltage: 380V/415V/460V/6KV/10KV. Frequency: 50Hz/60Hz
If you need special voltage or frequency, please inform us in advance.
Materials of 10" Deep Well Submersible Turbine Pump
Impeller: Cast iron, or tin bronze, SS304/316/316L, etc
Pump bowl: Cast iron, or tin bronze, SS304/316/316L, etc
Pump shaft: Cold-drawn steel with chrome plating, or stainless steel 2Cr13 (1050ºC thermal refining, enhancen torsional moment)
Motor Seal: Rubber O-ring seal, mechanical seal
Motor regulating sleeve: rubber
Advantages of 10" Deep Well Submersible Turbine Pump
1. Easy installation
2. Low noise, multistage
3. Built-in check valve avoiding water hammer impact.
4. High head with single stage, strong stability, the shaft diameter φ38mm, improving the equipment's torsional property. Bearing liner is made of natural rubber and more wear-resisting, meanwhile we have attached with imported hard bearing liner.
Supplys scope
Submersible pump unit (including the body and motor), built-in check valve, 1 flange matching with outlet, 8 bolts M14×60, 1 maintenance instruction, 1 conformity certificate, 1 packing list, external packing.
Friendly reminder:
For the customers' convenience and our products' quality, all the related products are manufactured by ourselves. The products detailed information are as follows:
1. All kinds of lifting pipes including high-frequency welded pipes (dia.25mm-500mm); Connection type: flange connection, screw connection and clamp connection. They are made accurately by machine tools.
2. Pipe clamp: the length is 50mm-500mm (we can produce the other different spans according to your requirements).
3. Wellhead devices: return flow wellhead instruments (applied to ground source heat pump), general pump seat (we have innovated and designed this kind of pump seat by replacing the original iron castings with steel plate welding; the cable lead-in hole has also been improved by substituting the U hole for middle lead-in hole, thus making more convenient for the customers.)
4. Desander: avoiding blocking and polluting by sand in water. And it contributes to long service life.
5. Related products: submersible cable, starting cabinet, frequency conversion cabinet, transformer, electric generating set, etc.
6. According to the conditions on the spot, we also supply the design proposals about pipe network, tank and installation.
Audited Supplier 
){kind=link}