Introduction of Electrical Submersible Pump (ESP) for Oilfield (Oil / Aquifer Medium) Electric submersible pump system consists of submersible pump (with intake or separator), gas handler, protector/seal section, motor, power cable & motor lead extension, downhole gauge/sensor, which is suitable for oilfield oil production engineering. It is used to lift oil at the bottom of the well to the ground. It is a roadless oil production equipment, which has the advantages of large flow capacity with high head. It can be widely used in high water-cut wells, deep wells, directional wells and other oil wells. According to user needs, it can also be used for transporting the other aquifer medium, like deep well water which has high head requirement.
Feature of Electrical Submersible Pump (ESP) for Oilfield
All stages are anti-corrosive material.
Optional coatings to improve corrosion resistance and erosion resistance
Each stage has wear-resistance washers.
Mixed flow impeller, space twisted vanes.
Wide channel impeller is used for lifting high viscosity liquid
Optional anti-corrosive materials or special coating
Wide range of high efficiency coverage
A variety of structural types including floating type, compressed type and AR type
Carbide bearing friction pairs application
Suitable for various well conditions.
Technical Data of Electrical Submersible Pump (ESP) for Oilfield
Flow capacity: 15~ 4500m3/d
Well size: >=4 1/2"
Head: 500~5000m
Pump suction liquid viscosity: <=7mm2/s
Gas-liquid ratio: <=0.3
Liquid flow velocity around motor when working: >=0.3m
Liquid solid content: <=500g/m3
Overall angle change rate: 3o/30m
Motor working temperature: 90°C, 120°C, 150°C, 180°C
Audited Supplier 
){kind=link}